Air-Conditioning System 1 (Open End Carding and RSM):

Cleaning Air Fan - wing diam. 1400 mm, 500 V, 30 kw, 975 RPM
Air Fan (spinning mill) - 500 V, 15 kw, 970 RPM
Air Fan (twisting mill) - 500 V, 5.5 kw, 1440 RPM
Air Fan (spooling mill) - 500 V, 4 kw, 1440 RPM
Washer Pump - type Etanorm 65-160, 500 V, 11 kw, 2900 RPM


Air-Conditioning System 2 (Carding and Combing Mill):

Air Fan - wing diam. 1600 mm, 500 V, 37 kw, 980 RPM
2 Air Fans (Combing Mill) - wing diam. 900 mm, 500 V, 11 kw, 1460 RPM
2 Pumps - type Etanorm 65-160, 500 V, 11 kw, 2935 RPM
Air Fan Front Mill (Carding Mill) - wing diam. 1400 mm, 500 V, 15 kw, 970 RPM


Air-Conditioning System 3 (RSM 1-17 and Flyers):

2 Air Fans - wing diam. 1400 mm, 500 V, 30 kw, 978 RPM
2 Air Fans - wing diam. 1600 mm, 500 V, 37 kw, 980 RPM
Air Fan (Flyers) - wing diam. 900 mm, 500 V, 11 kw, 1460 RPM
2 Pumps - type Etanorm 80-160, 500 V, 18.5 kw, 2945 RPM
Big Cleaning Fan (After drum-filter) - 500 V, 30 kw, 1465 RPM
Spare motor for Air Conditioning System, 500 V, 30 kw, 978 RPM
9 Air-Conditioning Systems
Air Fan dust collector B1.02
motor: 290/500 V, 3 kw, 50 Hz, 2890 RPM, 23 kg


Open End and Cross-Spooling Air-Conditioning Mill:

2 Air Fans - 18.5 kw, wing diam. 1250 mm
2 Air Fans - 15 kw, wing diam. 1120 mm
2 Pumps - type Etanorm 40-160, 500 V, 5.5 kw, 2920 RPM
Rotation filter LDF - drum diam. 2000 mm, 2 peices with 3 sections, 3 pieces
with 2 sections -
drum diam. 2500 mm, 1 piece with 3 sections -
drum diam. 1500 mm, 1 piece with 2 sections
turnable pre-filter Unit RPF 1 x type Open End, 1 x type Carding mill
Jet tubes
Drop Stoppers

Deposition Center for Combing Fibers
1 x pre-drop-stopper type 160
1 x LDF diam. 2000 mm with 1 section in Tex Pac Box
motor: 500 V, 30 kw, 1465 RPM
exhaust fan: Sovent-Ventec (constrution type 1)

both plants with high performance and in very good condition