capacity kg.12.700 - in 24 hours of cotton yarn count Ne 20/1 or kg.15.700 -
in 24 hours of cotton yarn count Ne 16/1
COTTON BALE-PLUCKER: LINE 1 + 2
1 Marzoli superblender - (electronic automatic bale-plucker) model B12 SB, built 1998,
with rotating arms on both sides, collecting band 25,000 mts,
plucking rollers diam. 230mm, working width 1800 mm.
1 Marzoli metal - detector, model B160, built 1994, (with permanent magnets)
COTTON OPENING LINE 1
1 Marzoli B95/4d, built 1995 SYNOTIC Electric board, for line n°1 and LINE n°2
1 Marzoli dust-separators, model B 46, built 1995
1 Marzoli multi-mixer, built 1990, mod. B140 / 3 with 08 cells,
completed with Marzoli B 41/1horizontal cages-condenser photoelectric stop cells
3 Marzoli horizontal opener, model B/36, built 1998-2000-1999, porcupine Beaterx 1,
carding Beater with 3 staves x1, carding Beater with 8 staves x1,
centralized suction scraps,
completed with Marzoli cage-condenser model B42/1 each, carding reel,
photoelectric stop cells, Kw 8.20 each
1 Jossi, model ED 33-1200.1, built 2002, Antipollution, Foreign fibers electronic control,
the vision shield, completed with Marzoli cage-condenser model B42/1, Kw 5.60 each
1 Marzoli multi-mixer, built 1997, mod. B143 with 08 cells,
completed with Marzoli B 42/1horizontal cages-condenser
2 Marzoli feeding-fan for chute line, model B151, built 1995, Kw 8.10 each
CARDING MACHINES - LINE 1
2 Marzoli flats hight production special carding-machines, model C501, built 2000,
with autolever including, automatic cans change, safty covers, exit can-coiler 40"x45",
electronic inverter power-device and microprocessor, capacity 100 kg / hour,
Marzoli chute feed B139, centralized suction under cards and flats, electrical power 7.4 KW each
5 Marzoli flats hight production special carding-machines, model CX400,
built 1996-1998-1999, with autolever including, automatic cans change, safty covers,
exit can- coiler 40"x45", electronic inverter power-device and microprocessor,
capacity 90 kg/hour, Marzoli chute feed B138, centralized suction under cards and flats,
electrical power 7.4 KW each
COTTON OPENING LINE 2
1 Marzoli dust-separators, built 1995, model B 46
1 Marzoli multi-mixer, built 1988, model B140/2 with 04 cells,
completed with Marzoli B 41/1 horizontal cages-condenser photoelectric stop cells.
2 Marzoli horizontal opener, built 1996-1995, model B/35, porcupine Beaterx1,
carding Beater with 3 staves x1, centralized suction scraps,
completed with Marzoli cage-condenser model B41/1 each, Kw8,20 each
1 Marzoli horizontal opener, model B/37, built 2004, carding Beater with 8 staves,
centralized suction scraps, completed with Marzoli cage-condenser model B41/1 each,
Kw 8.20 each
1 Marzoli multi-mixer, mod. B143 with 08 cells, built 1998,
completed with Marzoli B 41/1horizontal cages-condenser
1 Marzoli horizontal opener, model B/36, built 1997, porcupine Beaterx1,
centralized suction scraps, completed with Marzoli cage-condenser model B41/1 each,
Kw 8.20 each
3 Marzoli feeding-fan for chute line, model B151, built 1995, Kw 8.10 each
CARDING MACHINES - LINE 2
3 Marzoli flats hight production special carding-machines, model C501, built 2000,
with autolever including, automatic cans change, safty covers, exit can-coiler 40"x45",
electronic inverter power-device and microprocessor, capacity 100 kg/hour,
Marzoli chute feed B139, centralized suction under cards and flats,
electrical power 7.4 KW each
1 Marzoli flats hight production special carding-machines, model CX400, built 1997,
with autolever including, automatic cans change, safty covers,
exit can- coiler 40"x45", electronic inverter power-device and microprocessor,
capacity 90 kg/hour, Marzoli chute feed B138, centralized suction under cards and flats,
electrical power 7,4 KW each
POLYESTER OPENER & FEEDER LINE 3
1 Marzoli blending feeder for polyester fibers, model B10/1, built 1988,
reconditioned 2001, separate suction scraps , completed with Marzoli cage-condenser B41/2
1 Marzoli feeding-fan for chute line, model B151, built 1995, Kw 8.10 each
CARDING MACHINES - LINE 3
1 Marzoli flats hight production special carding-machine, model CX400, built 1995,
with autolever including, automatic cans change, safty covers, exit can-coiler 40"x45",
electronic inverter power-device and microprocessor, capacity
with polyester fibers 120/90 kg/hour, Marzoli chute feed B138, separate suction
under cards and flats, electrical power 7.4 KW each
3 Marzoli flats hight production special carding-machines, model CX300, built 1995,
with autolever including, automatic cans change, safty covers, exit can-coiler 40"x45",
electronic inverter power-device and microprocessor, capacity with polyester fibers 100/80 kg/hour,
Marzoli chute feed B136, separate suction under cards and flats, electrical power 7.4 KW each
DRAW FRAMES
4 Vouk draw frames model SH2-DC-E, built 1988, 2 heads, autoleveller,
control sliver count, automatic cans change, exit 2 cans 24"x48",
creel feeding cans 24"x42" with 8+8 couplings, cylindered type 3 of 4,
draw pneumatic pression, draw speed 450 meters/m. electrical power 9.5 KW
(pre-worsted processing)
1 Vouk draw frame model SH802/DC-CFG-E, built 1993, exit cans diam 18'',
2 heads with automatic cans change at the exit, 6 couplings for each head (6+6 total),
autoleveller Uster sliver control. Electronic drawing.
OPEN END SPINNING FRAMES
5 Schlafhorst Open End Spinning frame model Autocoro, spin-box SE 8,
built 1986-1987-1988, 120 rotors diam.40-(rpm. max.90.000 with rotor diam.-33,
rpm. working 70.000 with,rotor.diam.40)- rotors diam. 40mm. -
spinning rollers card type OB 20 (rpm . 6600-) - Corolab electronic yarn clearer,
2 knotting trolleys, 2-change-cones, trolleys, exit metric electronic counter
cylindrical-cones 6"x1°51. Informator.
2 Schlafhorst Open End Spinning frame model Autocoro-ACO, spin-box:SE 9,
built 1995, 240 rotors - rotors diam. 40mm. (rpm. max.110.000 with rotor diam.-30,
rpm. working 90.000-with,rotor.diam.40)- spinning rollers card type OB 20,
or.S21.DN (rpm. 7000-8000) - Corolab Plus, electronic yarn clearer,
2 knotting trolleys model-ASW3, 2-change-cones, trolleys, exit metric electronic
counter cylindrical-cones 6"x1°51, informator, type:1.3,waxing-device,
Box-lubrification-grease-for-rotors
1 Schlafhorst Open End Spinning frames model SE 8, built 1985,
originally modified by Suessen in SE11 in 2000, SRZ. 168 rotors, diam. 40mm (T),
KN4 nozzles, B200N roller card, Corolab electronic yarn clearer type 7.1,
completed with Top Stop, 1- Knotting carrier, 1 carriage for tubes.
3 Schlafhorst Open End Spinning frames model SE 8, SRZ, 1x built 1986,
2x built 1985, 168 rotors, diam. 40mm (T and B) and diam 46 (T), KN4 nozzles,
AB20 and AB174 roller cards, Amsler electronic slub-making device model STG4000,
Corolab electronic yarn clearer type 7.1, 1 knotting carrier, 1 carriage for tubes.
1 Caipo electronic slub-making device model 1510, built 2001
1 Transtecnica AGV electronic automatic carrier - robot for cans, built 1999
1 San Grato Automatic Line paletizing - boxes for packing yarn-cones, built 1996
LINE FOR RECOVERY WASTES
1 Marzoli blending waste feeder, model B10/1, built 1980, reconditioned 2001,
centralized suction scraps, completed with Marzoli cage-condenser
1 Marzoli horizontal opener, model B/35, built 1996-1995, porcupine Beaterx1,
carding Beater with 3 staves x1, carding Beater with 8 staves x1,
centralized suction scraps, completed with Marzoli cage-condenser model B41/1 each,
Kw 8.20 each
1 Arivent L 19 motor fan, for transport waste-fibers, Kw 7.50, built 1987
LINE FOR PACKING WASTES
1 Albapresse MAC 101, automatic baling presses, built 1984
1 LTG compactor for fibers-waste, built 1985
RIGENERATION WASTE PLANT
1 Kenya Central Suction Plant, built 1985
1 LTG FKA / S fibers compactor waste, built 1996
1 Arivent TL 19 motor fan, built 1986, for transport waste-fibers, Kw 7.50
1 Kenya pockets filters, built 1985
1 Arivent TL 19 motor fan, built 1986, for transport waste-fibers, Kw 7.50
1 Ormic section 56x60, built 1991, automatic baling presses
1 Comafer bricking machine, built 2000
1 Emmebi central suction plant. for line 1, built 1985
1 Kenya central suction plant, for carding lines 1 & 2, built 1985
1 Emmebi central suction plant, for line 2, built 1985
1 Emmebi central suction plant, for open end spinning, built 1985
TECHNOLOGICAL LABORATORY
1 electronic Uster Tester 3 complete of uster-expert, built 1997
1 Tenatex automatic, electronic dynamometer for yarns, built 1997
1 automatic air conditioner for all laboratory, built 1997
1 special balance for fibers control, built 1992
1 special device for micronaire fibers control, built 1992
1 electronic counting machine for count - yarn control, built 1992
1 Branca Idealair reeling machine for count-yarn control, built 1992
1 Branca Idealair -twistmeter machine for twist-yarn control, built 1992
1 balance - box for yarn control, built 1992
1 waxing special device for flow yarn control, built 1992
1 black-tables device for optical regular yarn control, built 1992
|
